Ball joint, upper transverse link
|
|
Ball joint, upper transverse link
|
|
1.
|
Raise the car and remove the rear wheel on the side in question.
|
|
2.
|
Unbolt the transverse link from the longitudinal link and place a spacer between the upper and lower transverse links.
|
|
2.
|
Tighten the bolt securing the transverse link to the longitudinal link.
Tightening torque 90 Nm +60° (70 lbf ft +60°) .
|
|
3.
|
Fit the wheel. See
Wheels
.
Tightening torques
aluminium rim 110 Nm (81 lbf ft)
pressed steel rim 50 Nm +2x90°, max. 110 Nm (37 lbf ft +2x90°, max. 81 lbf ft)
Lower the car to the floor.
|
