PRE-RELEASE

Warm start in auto

Warm start in auto

With warm start cold air must first be blown out through the panel vents so that the climate feels comfortable as soon as possible after starting. If the calculated temperature at driver head height is more than approximately 5°C higher than what the driver set on the ACC unit temperature knob then the warm start function will be activated until the temperature at driver head height corresponds with the setting.

The warm start function involves air distribution in panel position and approximately 20 A fan current directly after starting. The value rises as necessary to 25 A.

PRE-RELEASE

---

---

This project is supported by memberships and donations. If you use this site, please consider Joining SCNA and/or making a donation.