PRE-RELEASE
Fitting an additional modification identity plate
| Fitting an additional modification identity plate |
| To fit |
| 1. |
Open the luggage compartment. Lift and suspend the floor panel.
5D : Lift up the upholstery covering the spare wheel and hook it onto the tailgate. |
|
| 2. |
4D
: Bend the modification identity plate into a gentle arc against the sill.
|
|
| 3. |
Clean the area for the plate with Teroson FL T875. Remove the protective plastic backing from the plate.
|
|
| 4. |
4D
: Press the modification identity plate into place as shown in the illustration.
|
|
| 5. |
5D
: Press the modification identity plate into place as shown in the illustration. Refit the upholstery over the spare wheel.
|
|
| 6. |
Lower the floor panel and close the luggage compartment.
|
|
