PRE-RELEASE
Radiator crossmember
| Radiator crossmember |
| 1. |
Remove the front wings.
|
|
| 2. |
Drill out the spot-welds, grind away any weld joints and lift away the radiator crossmember.
|
|
| 3. |
Align the mounting points for the radiator crossmember if necessary.
|
|
| To fit |
| 1. |
Grind clean the surfaces to be welded on the spare part and on the body.
|
|
| 2. |
Drill holes for plug-welding in the spare part.
|
|
| 3. |
Apply welding primer to the surfaces to be spot welded.
|
|
| 4. |
Fit the radiator member in place and secure it with a few welding clamps. Close the bonnet and align the spare part.
|
|
| 5. |
Weld on the radiator crossmember.
|
|
| 6. |
Remove any remaining welding primer. Welding primer reduces adhesion of paint, filler and sealant.
|
|
| 7. |
Apply primer to all bare metal surfaces.
|
|
| 8. |
Seal joints and seams with sealant.
|
|
