PRE-RELEASE
Remote control, tailgate 5D
| Remote control, tailgate 5D |
When the button on the remote control is depressed, it sends a signal to the receiver, which processes the signal and sends it on to the TWICE control module.
A short voltage pulse (0.8 sec.) is fed to the tailgate lock motor from TWICE control module pin 51 via relay 594, which activates when the coil is grounded by TWICE control module pin 2. The tailgate lock motor will then lock the tailgate.
The lock motor is grounded on pins 44 and 67 of the TWICE control module.
| Unlocking with remote control |
When button C on the remote control is pressed, only the tailgate is unlocked. The tailgate can then be opened with a press of the soft-touch button.
The lock motor is grounded by pins 44 and 62 on the TWICE control module.
When the key is in the ignition, it will not be possible to unlock the tailgate with the remote control.
| TSL locking/unlocking of tailgate (not US/CA) |
TSL-locking
TSL locking with remote control - press button A twice within five seconds to activate TSL. The tailgate lock motor is TSL locked together with the other lock motors.When the button on the remote control is pressed the first time, it sends a signal to the receiver, which processes the signal and sends it on to the TWICE control module.
A short voltage pulse (0.8 sec.) is fed to the tailgate lock motor from TWICE control module pin 51 via relay 594, which activates when the coil is grounded by TWICE control module pin 2. The tailgate lock motor will then lock the tailgate.
The lock motor is grounded on pins 44 and 67 of the TWICE control module.
When the button on the remote control is pressed the second time within five seconds, the remote control will send a signal to the receiver, which processes the signal and sends it on to the TWICE control module.
A short voltage pulse (0.8 sec.) is fed from TWICE control module pin 44 to the tailgate lock motor, which activates TSL on the tailgate.
The lock motor is grounded to TWICE control module pin 67 and pin 62 via relay 594, which is inactive.
TSL unlocking
When the car doors are unlocked with remote control button B after being TSL locked, the tailgate lock motor will go to its locked position.The tailgate is unlocked using button C on the remote control, at which time the other doors go to their locked position. To TSL lock the car once again, press remote control button A two times.
When button C on the remote control is pressed, it sends a signal to the receiver, which processes the signal and sends it on to the TWICE control module.
A short voltage pulse (0.8 sec.) is fed from TWICE control module pin 67, whereby the lock motor will go from TSL locked position to locked position.
The lock motor is grounded to the TWICE control module by pin 62 via relay 594, which is inactive.
Once the voltage pulse (0.8 sec.) has ceased, TWICE will output B+ on pin 67 and the lock motor will go from locked position to unlocked position.
The lock motor is grounded on pins 44 and 62 of the TWICE control module.
