Drive belt for auxiliaries
|
|
Drive belt for auxiliaries
|
|
2.
|
Remove the lower engine cover and the drive belt cover.
|
|
3.
|
Relieve tension on the belt tensioner by using a jointed wrench to turn it clockwise. Lock the tensioner with
87 92 335
.
|
|
4.
|
Remove the belt. If the old belt is to be refitted, mark the direction of rotation.
|
|
1.
|
Fit the belt. If the old belt is to be refitted, do so following the marked direction of rotation.
|
|
2.
|
Relieve tension on the belt tensioner and remove the lock pin.
|
|
3.
|
Check the position of the belt on all the pulleys.
|
|
4.
|
Fit the drive belt cover and the lower engine cover.
|
|
5.
|
Lower the car to the floor.
|
