PRE-RELEASE
Recirculation Flap
| Recirculation Flap |
| To remove |
| 1. |
Remove the glove box. See
Glove box
.
Remove the side trim on the centre console. 
|
|
| 2. |
Remove the recirculation flap screws. Pull the motor straight down.
|
|
| 3. |
Remove the connector.
|
|
| To fit |
| 1. |
Lubricate the linkage arm with
32 025 041 Silicone grease
. Lift up the recirculation flap using a screwdriver. Put the recirculation motor in place and fit its bolts.
|
|
| 2. |
Connect the contact.
|
|
| 3. |
Replace the side trim on the centre console.
Fit the glove box. See Glove box . 
|
|
