SAAB WIS ONLINE

PRE-RELEASE

Stepping motor, air-blending RH

Stepping motor, air-blending RH

To remove


Put the air-mix control to max cold or max heat before commencing removal.


1. LHD: Remove the glove box (A) and centre console, see Glove box .

RHD: Remove the bottom of the panel (3 screws) (A) and detach the diagnostics socket (2 screws) and the floor lighting (B).


2. Remove the stepping motor, 2 screws (B).


3. Uncouple the connection (C).


To fit


1. Fit the stepping motor, 2 screws (B).


2. Couple in the stepping motor connection (C).

3. LHD: Fit the glove box (A), see Glove box .


RHD: Fit the diagnostics socket (2 screws) and floor lighting (B).


4. RHD: Fit the lower part of the panel, 3 screws (A).


PRE-RELEASE