Crankshaft and Bearing Removal
|
|
Crankshaft and Bearing Removal
|
|
Crankshaft End Play Measurement
|
|
1.
|
Place a dial indicator at the crankshaft nose.
|
|
2.
|
Gently force the crankshaft to the extreme front and rear positions with a pry tool while monitoring the movement of the dial indicator.
|
|
4.
|
If the specifications are exceeded inspect the thrust bearing thrust OD and the crankshaft thrust wall for wear and/or excessive runout. Refer to
Engine Mechanical Specifications
.
|
|
5.
|
Replace the thrust bearing or crankshaft as necessary.
|
|
Crankshaft and Bearing Removal
|
|
1.
|
Loose the 10 crankshaft bearing cap bolts as shown in sequence.
|
|
2.
|
Remove the 10 crankshaft bearing cap bolts (1, 2).
|
|
3.
|
Remove the 5 crankshaft bearing caps (3).
|
|
4.
|
Using 2 hands, lift the crankshaft straight up from the engine block.
|
|
5.
|
Place the crankshaft in a secure place.
|
|
6.
|
Prepare a piece of cardboard or equivalent, numbered (1-5) for bearing identification. Main bearing journals are numbered from the front of the engine.
|
|
7.
|
Remove the 10 crankshaft bearing halves (4) from the cylinder block and the crankshaft. Note the position of the thrust bearing.
|
|
8.
|
Place the 10 crankshaft bearing (4) on the cardboard in the correct positions.
|
|
9.
|
Remove the 3 increment wheel bolts (2).
|
|
10.
|
Remove the increment wheel (1).
|
