Engine Flywheel Cleaning and Inspection
|
|
Engine Flywheel Cleaning and Inspection
|
|
1.
|
Refer to
Safety Glasses and Compressed Air Warning
.
|
Note
|
|
In order to maintain the proper component balance, contact surface taper, and heat transfer, manual transmission flywheels are NOT to be machined.
|
Clean the flywheel (1, 2) in solvent.
|
|
2.
|
Dry the flywheel (1) with compressed air.
Inspect the manual transmission flywheel for the following:
|
|
|
•
|
Damaged ring gear teeth
|
|
|
•
|
Loose or improperly positioned ring gear
|
|
|
•
|
The ring gear has an interference fit onto the flywheel and should be positioned completely against the flange of the flywheel.
|
|
|
•
|
A scored, grooved or damaged friction surface
|
