PRE-RELEASE
Engine Flywheel Installation
| Engine Flywheel Installation |
Special Tools
| • |
EN 45059
Torque Angle Sensor Kit
|
|
| • |
EN-46792
Crankshaft/Flywheel Holder
|
|
For equivalent regional tools, refer to Special Tools .
| 1. |
Install the flywheel (1).
|
|
| 2. |
Install the 6 NEW flywheel bolts (2).
|
|
| 3. |
Refer to
Fastener Caution
.
Hold the crankshaft with EN 46792 holder, tighten the bolts in sequence evenly to 160 Nm (118 lb ft) , using the EN 45059 angle sensor. |
|
