Base Engine Misfire with Abnormal Internal Lower Engine Noises
|
|
Base Engine Misfire with Abnormal Internal Lower Engine Noises
|
|
Cause
|
Correction
|
Abnormalities, severe cracking, bumps, or missing areas in the accessory drive belt
Abnormalities in the accessory drive system and/or components may cause engine RPM variations, noises similar to a faulty lower engine, and also lead to a misfire condition. A misfire code may be present without an actual misfire condition.
|
Replace the drive belt.
|
Worn, damaged, or mis-aligned accessory drive components or excessive pulley runout
A misfire code may be present without an actual misfire condition.
|
Inspect the components, repair or replace as required.
|
Loose or improperly installed engine flywheel or crankshaft balancer
A misfire code may be present without an actual misfire condition.
|
Repair or replace the flywheel and/or balancer as required.
|
Loose torque converter bolts
A misfire code may be present without an actual misfire condition.
|
Inspect the torque converter bolts and flywheel. Repair or replace as required.
|
Worn piston rings
Oil consumption may or may not cause the engine to misfire.
|
|
2.
|
Perform cylinder leak down and compression testing to identify the cause.
|
|
3.
|
Repair or replace as required.
|
|
Worn crankshaft thrust bearings
Severely worn thrust surfaces on the crankshaft and/or thrust bearing may permit fore and aft movement of the crankshaft, and create a misfire code without an actual misfire condition.
|
Replace the crankshaft and bearings, as required.
|
Overfilled Crankcase
|
|
1.
|
Check engine oil level with vehicle on a level surface.
|
|
2.
|
Correct any overfilled condition.
|
|
3.
|
Inspect for fuel leaks into the crankcase.
|
|
4.
|
Repair any fuel leaks.
|
|
