Engine Flywheel Installation (Automatic Transmission)
|
|
Engine Flywheel Installation (Automatic Transmission)
|
Special Tools
|
•
|
EN-43653
Flywheel Holding Tool
|
For equivalent regional tools, refer to
Special Tools (LDK, LHU)
.
|
1.
|
Install the flywheel (1) for automatic transmission.
|
|
2.
|
Install the NEW bolts.
|
|
3.
|
Install
EN-43653
flywheel holding tool in the starter assembly location, engaging the flywheel, in order to prevent crankshaft rotation.
|
|
4.
|
Tighten the flywheel bolts to
53 Nm (39 lb ft) plus 25 degrees
using the
EN-45059
angle meter.
|
|
5.
|
Remove
EN-43653
flywheel holding tool .
|
