PRE-RELEASE
Oil Filter with Cap and Seal Installation
| Oil Filter with Cap and Seal Installation |
Special Tools
EN-44887 Oil Filter SpannerFor equivalent regional tools, refer to Special Tools (LDK, LHU) .
| 1. |
Install a new oil filter (2) on the oil filter cap (1).
|
|
| 2. |
Lubricate the oil filter cap O-ring with 5W30 engine oil.
|
|
| 3. |
Refer to
Fastener Caution
.
Use the EN-44887 wrench to install the oil filter and cap. Tighten the oil filter and cap to 22 Nm (16 lb ft) . |
|
