Water Pump Installation (LDK, LHU)
|
|
Water Pump Installation (LDK, LHU)
|
|
Note
|
|
Prior to installing the water pump, read the entire procedure. Pay special attention to avoid part damage and to ensure proper sealing.
|
|
1.
|
Install the water pump assembly (1) with a new gasket (2).
|
|
2.
|
|
Note
|
|
Do not install the front water pump bolt until after the engine front cover is on.
|
Install the water pump bolts. Finger tighten the bolts.
|
|
3.
|
Refer to
Fastener Caution
.
Tighten the water pump bolts to
25 Nm (18 lb ft)
.
|
|
5.
|
Install the water pump drain plug and tighten to
20 Nm (15 lb ft)
, if necessary.
|
|
6.
|
Install the water feed tube (2).
|
|
7.
|
Lubricate the feed tube O-ring with antifreeze.
|
|
8.
|
Install the water feed tube by twisting and pushing toward the water pump. Take care not to tear or damage the O-ring.
|
|
9.
|
Install the thermostat housing (1) to block bolts and stud and tighten the thermostat housing bolts to
10 Nm (89 lb in)
.
|
|
10.
|
Install the coolant temperature sensor (1) by hand.
|
|
11.
|
Tighten the coolant temperature sensor to
20 Nm (15 lb ft)
.
|
