PRE-RELEASE

Engine Front Cover Assemble

•

EN 46103 Camshaft Actuator Valve Seal Remover/Installer

•

EN 47635 Output Shaft Seal Installer

For equivalent regional tools, refer to Special Tools .

Note
Do not lubricate the crankshaft front oil seal or the crankshaft balancer sealing surfaces. The crankshaft balancer is installed into a dry seal.

Install the NEW crankshaft front oil seal into the engine front cover using the EN 47635 installer.

Place the seal into position with the notches (1) in the seal down. The notches (1) will face inboard when properly installed.

Install the NEW camshaft position actuator valve oil seals into the engine front cover using the EN 46103 installer.