PRE-RELEASE
Engine Mount Inspection
| Engine Mount Inspection |
| 1. |
Install the engine support fixture engine bridge, retainer frame. Refer to
Engine Support Fixture (Rear Left Side)
Engine Support Fixture (Rear Right Side)
Engine Support Fixture (Front)
.
|
|
| 2. |
Observe the engine mount while raising the engine. Raising the engine removes the weight from the engine mount and creates slight tension on the rubber.
|
|
| 3. |
Replace the engine mount if the engine mount exhibits any of the following conditions:
|
|
| • |
The hard rubber is covered with heat check cracks.
|
| • |
The rubber is separated from the metal plate of the engine mount.
|
| • |
The rubber is split through the center of the engine mount.
|
| 4. |
For engine mount replacement, refer to one of the following:
|
|
| • |
Engine Mount Bracket Replacement - Right Side
|
| • |
Transmission Front Mount Replacement
for the AF40-6 transmission
|
| • |
Transmission Front Mount Replacement
for the F40 transmission
|
| • |
Transmission Rear Mount Replacement
for the AF40-6 transmission
|
| • |
Transmission Rear Mount Replacement
for the F40 transmission
|
| • |
Transmission Mount Replacement - Left Side
for the AF40-6 transmission
|
| • |
Transmission Mount Replacement - Left Side
for the F40 transmission
|
