Valve Rocker Arm Installation - Right Side
|
|
Valve Rocker Arm Installation - Right Side
|
|
2.
|
|
Note
|
|
The valve rocker arm must be positioned squarely on the valve tip so that the full width of the roller will completely contact the camshaft lobe. If the valve rocker arm are being reused you must put them back in their original location.
|
Place the valve rocker arms in position on the valve tip and the valve lifters.
|
|
3.
|
The rounded head end of the valve rocker arm goes on the valve lifter while the flat end goes on the valve tip.
|
|
4.
|
Clean the camshaft journals and carriers with a clean, lint-free cloth.
|
