SAAB WIS ONLINE

PRE-RELEASE

Charge Air Cooler Inlet Pipe and Outlet Pipe Replacement

Charge Air Cooler Inlet Pipe and Outlet Pipe Replacement



Callout Component Name

Preliminary Procedure

1. Remove the engine shield. Refer to Engine Shield Replacement .

2. Remove the charge cooler inlet hose. Refer to Charge Air Cooler Inlet Hose Replacement (LBS/A20DTH) Charge Air Cooler Inlet Hose Replacement (LAU/A28NER) .

3. Remove the charge cooler outlet hose. Refer to Charge Air Cooler Outlet Hose Replacement (Diesel) Charge Air Cooler Outlet Hose Replacement (LAU/A28NER) .

4. Detach coolant hoses from charge cooler outlet pipe.


1

Charge Cooler Outlet Pipe Fasteners (Qty: 3)

Refer to Fastener Caution .

Procedures

Release the charge cooler upper outlet pipe from the throttle body.

Tighten

9 Nm (80 lb in)

2

Charge Cooler Bracket Fastener

Procedures

Release the charge cooler upper outlet pipe from the engine.

Tighten

9 Nm (80 lb in)

3

Charge Cooler Outlet Pipe

4

Charge Cooler Lower Pipe

5

Charge Cooler Inlet Pipe Fastener


Procedures

1. Release the charge cooler inlet pipe from the turbocharger.

2. Replace gasket.


Tighten

22 Nm (16 lb ft)

6

Charge Air Cooler Inlet Pipe



PRE-RELEASE