SAAB WIS ONLINE

PRE-RELEASE

Engine Coolant Temperature Sensor Replacement

Engine Coolant Temperature Sensor Replacement



Callout Component Name

Preliminary Procedure

1. Remove the engine sight shield. Refer to Engine Sight Shield Replacement .

2. Drain the cooling system. Refer to Cooling System Draining and Filling (LDK/A20NHT) and Cooling System Draining and Filling (LBS/A20DTH) Cooling System Draining and Filling (LAU/A28NER) .


1

Engine Coolant Temperature Sensor

Refer to Fastener Caution .


Procedures

1. Use a new gasket.

2. Disconnect the electrical connector.


Tighten

20 Nm (15 lb ft)



PRE-RELEASE