SAAB WIS ONLINE

PRE-RELEASE

Fuel Injection Fuel Rail Assembly Replacement

Fuel Injection Fuel Rail Assembly Replacement



Callout Component Name

Preliminary Procedure

1. Relieve the fuel system pressure. Refer to Fuel Pressure Relief .

2. Remove the upper intake manifold. Refer to Upper Intake Manifold Replacement .

3. Disconnect the fuel feed pipe quick connect fitting. Refer to Fuel Feed Pipe Replacement .


1

Fuel Injection Fuel Rail Wiring Harness

2

Fuel Injection Fuel Rail Fastener (Qty: 3)

Refer to Fastener Caution .

Tighten

10 Nm (89 lb in)

3

Fuel Injection Fuel Rail

4

Fuel Injector Retainer (Qty: 6)

5

Fuel Injector (Qty: 6)

6

Fuel Injector O-Ring (Qty: 12)



PRE-RELEASE