PRE-RELEASE
Catalytic Converter Replacement (LAU/A28NER)
| Catalytic Converter Replacement (LAU/A28NER) |
| Removal Procedure |
| 1. |
Remove the fuel injector sight shield. Refer to
Fuel Injector Sight Shield Replacement
.
|
|
| 2. |
Disconnect the negative battery cable. Refer to
Battery Negative Cable Disconnection and Connection
.
|
|
| 3. |
Drain the cooling system. Refer to
Cooling System Draining and Filling (LDK/A20NHT)
and
Cooling System Draining and Filling (LBS/A20DTH)
Cooling System Draining and Filling (LAU/A28NER)
.
|
|
| 4. |
Raise and support the vehicle. Refer to
Lifting and Jacking the Vehicle
.
|
|
| 5. |
Remove the propeller shaft. Refer to
Propeller Shaft Replacement
.
|
|
| 6. |
Remove exhaust front pipe. Refer to Exhaust System Replacement (LDK/A20NHT - FWD) Exhaust System Replacement (LAU/A28NER) Exhaust System Replacement (LDK/A20NHT-AWD, LAU/A28NER-AWD ) . |
|||||||
| 7. |
Remove the catalytic converter brace (1).
|
|
| 8. |
Lower the vehicle.
|
|
| 9. |
Remove the battery tray. Refer to
Battery Tray Replacement (Diesel)
Battery Tray Replacement (LDK/A20NHT)
.
|
|
| 10. |
Remove the engine coolant air bleed pipe. Refer to
Upper Intake Manifold Replacement
.
|
|
| 11. |
Remove the turbocharger coolant return pipe and hose (1).
|
|
| 12. |
Remove the power brake booster heat shield.
|
|
| 13. |
Remove the catalytic converter front heat shield (1).
|
|
| 14. |
Remove the transmission heat shield (1).
|
|
| 15. |
Remove the heated oxygen sensor 1. Refer to
Heated Oxygen Sensor Replacement - Sensor 1
.
|
|
| 16. |
Remove the heated oxygen sensor 2. Refer to
Heated Oxygen Sensor Replacement - Sensor 2
.
|
|
| 17. |
Remove the catalytic converter (1).
|
|
| Installation Procedure |
| 1. |
Install the catalytic converter (1) and tighten to
20 Nm (15 lb ft)
.
|
|
| 2. |
Install the heated oxygen sensor 2. Refer to
Heated Oxygen Sensor Replacement - Sensor 2
.
|
|
| 3. |
Install the heated oxygen sensor 1. Refer to
Heated Oxygen Sensor Replacement - Sensor 1
.
|
|
| 4. |
Install the gearbox heat shield bolts (1) and tighten to
8 Nm (71 lb in)
.
|
|
| 5. |
Install the catalytic converter's front heat shield (1) and tighten to
8 Nm (71 lb in)
.
|
|
| 6. |
Install the power brake booster heat shield.
|
|
| 7. |
Install the for turbocharger coolant return pipe and hose (1) and tighten to
30 Nm (22 lb ft)
.
|
|
| 8. |
Install the engine coolant air bleed pipe. Refer to
Upper Intake Manifold Replacement
.
|
|
| 9. |
Install the battery tray. Refer to
Battery Tray Replacement (Diesel)
Battery Tray Replacement (LDK/A20NHT)
.
|
|
| 10. |
Raise the vehicle.
|
|
| 11. |
Install the catalytic converter bracket (1) and tighten to
20 Nm (15 lb ft)
.
|
|
| 12. |
Install the exhaust front pipe. Refer to
Exhaust System Replacement (LDK/A20NHT - FWD)
Exhaust System Replacement (LAU/A28NER)
Exhaust System Replacement (LDK/A20NHT-AWD, LAU/A28NER-AWD )
.
|
|
| 13. |
Install the propeller shaft. Refer to
Propeller Shaft Replacement
.
|
|
| 14. |
Connect the negative battery cable. Refer to
Battery Negative Cable Disconnection and Connection
.
|
|
| 15. |
Install the fuel injector sight shield . Refer to
Fuel Injector Sight Shield Replacement
.
|
|
| 16. |
Fill the cooling system. Refer to
Cooling System Draining and Filling (LDK/A20NHT)
and
Cooling System Draining and Filling (LBS/A20DTH)
Cooling System Draining and Filling (LAU/A28NER)
.
|
|
