PRE-RELEASE
Driver Seat and Passenger Seat Heater Control Module Scan Tool Information
| Driver Seat and Passenger Seat Heater Control Module Scan Tool Information |
Front Seat Heating Control Module Scan Tool Data Parameters
| Parameter | Expected Value | Description |
|
Operating Conditions:
Engine Running
|
||
|
Driver Seat Blower Duty Cycle
|
Varies
|
The scan tool displays 0-100 %. The value displayed is a PWM signal from the seat heating control module to the logic terminal of the seat blower motor. Higher values indicate higher blower motor speeds while lower values indicate lower blower motor speeds.
|
|
Driver Seat Cushion Heating Command
|
Inactive
|
The scan tool displays Inactive or Active. This parameter displays the commanded output from the seat heating control module to the seat heater elements.
|
|
Driver Seat Cushion Temperature Sensor
|
Varies
|
The scan tool displays 0-5 V. The voltage displayed is an input to the seat heating control module from the seat cushion temperature sensor. Higher voltage readings indicate cooler seat temperatures while lower voltage readings indicate warmer seat temperatures.
|
|
Driver Seat Heating/Venting/Cooling Level
|
Off
|
The scan tool displays Off, Low Medium, or High. When the heated or vented seat is active, this parameter displays the selected temperature setting.
|
|
Driver Seat Heating/Venting/Cooling Mode
|
Off
|
The scan tool displays Off, Back & Cushion Heat, or Vent. This parameter indicates the heated or vented seat mode of operation.
|
|
Passenger Seat Blower Duty Cycle
|
Varies
|
The scan tool displays 0-100 %. The value displayed is a PWM signal from the seat heating control module to the logic terminal of the seat blower motor. Higher values indicate higher blower motor speeds while lower values indicate lower blower motor speeds.
|
|
Passenger Seat Cushion Heating Command
|
Inactive
|
The scan tool displays Inactive or Active. This parameter displays the commanded output from the seat heating control module to the seat heater elements.
|
|
Passenger Seat Cushion Temperature Sensor
|
Varies
|
The scan tool displays 0-5 V. The voltage displayed is an input to the seat heating control module from the seat cushion temperature sensor. Higher voltage readings indicate cooler seat temperatures while lower voltage readings indicate warmer seat temperatures.
|
|
Passenger Seat Heating/Venting/Cooling Level
|
Off
|
The scan tool displays Off, Low Medium, or High. When the heated or vented seat is active, this parameter displays the selected temperature setting.
|
|
Passenger Seat Heating/Venting/Cooling Mode
|
Off
|
The scan tool displays Off, Back & Cushion Heat, or Vent. This parameter indicates the heated or vented seat mode of operation.
|
Front Seat Heating Control Module Scan Tool Output Controls
| Control Functions | Description |
|
Operating Conditions:
Engine Running
|
|
|
Driver Seat Blower
|
This output control is used to command the driver seat blower motors On.
|
|
Driver Seat Cushion Heating
|
This output control is used to command the driver seat heater elements On.
|
|
Passenger Seat Blower
|
This output control is used to command the passenger seat blower motors On.
|
|
Passenger Seat Cushion Heating
|
This output control is used to command the passenger seat heater elements On.
|
