SAAB WIS ONLINE

PRE-RELEASE

Driver Information Display Replacement (UAG/UFD)

Driver Information Display Replacement (UAG/UFD)



Callout Component Name

Preliminary Procedure

1. Disconnect the negative battery cable. Refer to Battery Negative Cable Disconnection and Connection .

2. Remove the instrument panel lower center trim panel. Refer to Instrument Panel Lower Center Trim Panel Replacement .


1

Driver Information Display Fastener (Qty: 4)

See Fastener Caution .

2

Driver Information Display


Procedures

1. Remove the driver information display from the instrument panel upper center trim panel.

2. Disconnect the electrical connection.

3. For programming and set up information, refer to Control Module References .




PRE-RELEASE