Accessory Power Receptacle Replacement
|
|
Accessory Power Receptacle Replacement
|
Special Tools
BO-48871
Cigar Lighter Socket Remover
For equivalent regional tools, refer to
Special Tools
.
|
1.
|
Remove the auxiliary power outlet fuse from the fuse block.
|
|
2.
|
Remove the receptacle:
|
|
|
2.1.
|
Look into the receptacle. There are two 3 mm (0.11 in) tab windows 12 mm (0.47 in) from the front of the receptacle. The
EL 42059
Remover pushes the plastic latches from these tab windows and the receptacle can be pulled straight out.
|
|
|
2.2.
|
Use the
BO-48871
Remover to pull the receptacle straight out.
|
|
|
2.3.
|
Remove the electrical connector.
|
|
1.
|
Connect the electrical connector to the receptacle.
|
|
2.
|
Route the connector through the retainer. Align the accessory power receptacle retainer to the slot in the opening.
|
|
3.
|
Install the retainer by pressing into place fully seated.
|
|
4.
|
Connect the electrical connector to the receptacle.
|
|
5.
|
Align the tabs on the receptacle to the slots in the retainer. Install the accessory power receptacle by pressing into place until fully seated.
|
|
6.
|
Install the accessory power receptacle fuse.
|
