Differential Clutch Seal Replacement (Inner)
|
|
Differential Clutch Seal Replacement (Inner)
|
|
Callout
|
Component Name
|
Preliminary Procedure
Remove the differential clutch. Refer to
Differential Clutch Replacement
.
|
1
|
Differential Clutch Seal Inner
Procedures
|
1.
|
Fasten a 13 mm open end wrench to the Differential Clutch Housing according the picture.
|
|
2.
|
Press out the seal with a screwdriver. Exercise care so as not to damage the housing.
|
|
3.
|
Remove the open end wrench.
|
|
4.
|
Press the seal into the differential clutch housing by using special tools
DT-8791352 and DT-8390114
and a hydraulic press.
|
|
5.
|
The seal shall be flush with the axle.
|
Special Tools
|
•
|
DT- 8791352
Pressing Sleeve
|
|
•
|
DT-8390114
Sleeve, Drive Gear
|
For equivalent regional tools, refer to
Special Tools
.
|
