PRE-RELEASE
Automatic Transmission Wiring Harness Replacement
| Automatic Transmission Wiring Harness Replacement |
| Removal Procedure |
| 1. |
Remove control valve body cover. Refer to
Control Valve Body Cover Replacement
.
|
|
| 2. |
Remove control valve body. Refer to
Control Valve Body Replacement
.
|
|
| 3. |
Remove the transmission control module. Refer to
Transmission Control Module Replacement
.
|
|
| 4. |
Remove the wiring harness.
|
|
| • |
Remove the clip (1).
|
| • |
Lift out the wiring harness (2).
|
| Installation Procedure |
| 1. |
Fit the wiring harness.
Fit a new seal (2) in the gearcase and an O-ring (1) on the connection. 
|
|
| 2. |
Fit in the wiring harness (2).
Make sure that the connector's guide pin locates in the groove and fit the clip (1).
|
|
| 3. |
Fit the transmission control module. Refer to
Transmission Control Module Replacement
.
|
|
| 4. |
Fit the control valve body. Refer to
Control Valve Body Replacement
.
|
|
| 5. |
Fit the control valve body cover. Refer to
Control Valve Body Cover Replacement
.
|
|
