SAAB WIS ONLINE

PRE-RELEASE

Transmission Fluid Cooler Hose Replacement

Transmission Fluid Cooler Hose Replacement



Callout Component Name

Preliminary Procedure

1. Remove the engine shield. Refer to Engine Shield Replacement .

2. Disconnect the transmission lines from the radiator. Refer to Transmission Fluid Cooler Hose/Pipe Quick-Connect Fitting Disconnection and Connection .


1

Transmission Fluid Cooler Pipe Bracket Nut

Refer to Fastener Caution .

Tighten

10 Nm (89 lb in)

2

Transmission Fluid Cooler Hose

Procedures

Discard the hose and install NEW seals prior to installation of the pipe.



PRE-RELEASE