SAAB WIS ONLINE

PRE-RELEASE

Shift Control Housing Replacement

Shift Control Housing Replacement



Callout Component Name

Preliminary Procedure

1. Remove the battery tray. Refer to Battery Tray Replacement (Diesel) Battery Tray Replacement (LDK/A20NHT) .

2. Remove the manual transmission shift lever cable from the shift control housing.


1

Shift Control Housing Fastener (Qty: 2)

Refer to Fastener Caution .

Tighten

26 Nm (19 lb ft)

2

Shift Control Housing


Procedures

1. Detach the cables from the shift linkage lever.

2. Remove the shift cables from the counterhold.

3. After installation, adjust the manual transmission shift lever cable. Refer to Manual Transmission Shift Lever Cable Adjustment .




PRE-RELEASE