SAAB WIS ONLINE

PRE-RELEASE

Rear Camber Adjustment

Rear Camber Adjustment



1. Loosen the upper control arm-to-frame fastener enough to allow movement.

Note

The frame of the vehicle is slotted, turning the cam nut will move the camber in to the designated location.



2. Rotate the upper control arm-to-frame fastener in the direction necessary to the correct the camber measurement.

3. Snug the upper control arm-to-frame fastener, do not tighten at this time.

4. Reinspect the rear camber specifications and adjust as necessary.

5. Refer to Fastener Caution .

Hold the nut and tighten the NEW upper control arm-to-frame bolt.

Tighten

150 Nm (111 lb ft)

6. Repeat the procedure for the other rear wheel.


PRE-RELEASE