SAAB WIS ONLINE

PRE-RELEASE

Auxiliary Temperature Valve Actuator Replacement

Auxiliary Temperature Valve Actuator Replacement



Callout Component Name

Preliminary Procedure

1. Disconnect the negative battery cable. Refer to Battery Negative Cable Disconnection and Connection .

2. Remove the instrument panel lower trim panel insulator - driver side. Refer to Refer to Instrument Panel Lower Trim Panel Insulator Replacement - Driver Side .

3. Loosen the carpet in the range of the front floor console and instrument panel on the left side.


1

Temperature Valve Actuator Screw (Qty: 2)

Refer to Fastener Caution .

Tighten

1,5 Nm (13 lb in)

2

Temperature Valve Actuator

Procedures

Disconnect the temperature actuator electrical connector.

Note

Actuator is self-calibrating when connecting the battery.




PRE-RELEASE