PRE-RELEASE

Engine Coolant Heater Bracket Replacement (Front)

Removal Procedure

1.	Remove the front bumper fascia. Refer to Front Bumper Fascia Replacement

2.	Remove the front wheelhouse front liner. Refer to Front Wheelhouse Front Liner Replacement .

3.	Note Use a suitable tool. Secure the engine coolant heater.

4.	Remove the engine coolant heater bracket fastener (1).

5.	Remove the engine coolant heater bracket fastener (2).

Installation Procedure

1.	Refer to Fastener Caution . Install the engine coolant heater bracket fastener (1) and tighten the fastener to 9 Nm (80 lb in) .

2.	Install the engine coolant heater bracket fastener (2) and tighten the fastener to 100 Nm (74 lb ft) .

3.	Release the engine coolant heater.

4.	Install the front wheelhouse front liner. Refer to Front Wheelhouse Front Liner Replacement .

5.	Install the front bumper fascia. Refer to Front Bumper Fascia Replacement

PRE-RELEASE

This project is supported by memberships and donations. If you use this site, please consider Joining SCNA and/or making a donation.

Our Friends