PRE-RELEASE
Engine Coolant Heater Control Module Replacement
| Engine Coolant Heater Control Module Replacement |
| Removal Procedure |
| 1. |
Disconnect the negative battery cable. Refer to
Battery Negative Cable Disconnection and Connection
.
|
|
| 2. |
Remove instrument panel compartment. Refer to
Instrument Panel Compartment Replacement
.
|
|
| 3. |
Remove the both engine coolant heater control module fasteners (1).
|
|
| 4. |
Disconnect the electrical connector (1) from the engine coolant control module (2).
|
|
| 5. |
Remove the engine coolant control module.
|
|
| Installation Procedure |
| 1. |
Install the engine coolant control module to the instrument panel tie bar anchor plate.
|
|
| 2. |
Connect the electrical connector (1) to the engine coolant control module (2).
|
|
| 3. |
Install the instrument panel compartment. Refer to
Instrument Panel Compartment Replacement
.
|
|
| 4. |
Connect the negative battery cable. Refer to
Battery Negative Cable Disconnection and Connection
.
|
|
