SAAB WIS ONLINE

PRE-RELEASE

Engine Coolant Heater Fuel Pump Replacement

Engine Coolant Heater Fuel Pump Replacement



Callout Component Name

Preliminary Procedure

Raise the vehicle by its full height. Refer to Lifting and Jacking the Vehicle .

1

Engine Coolant Heater Fuel Pump Bracket

Warning

Gasoline or gasoline vapors are highly flammable. A fire could occur if an ignition source is present. Never drain or store gasoline or diesel fuel in an open container, due to the possibility of fire or explosion. Have a dry chemical (Class B) fire extinguisher nearby.


Warning

Wrap a shop towel around the fuel pressure connection in order to reduce the risk of fire and personal injury. The towel will absorb any fuel leakage that occurs during the connection of the fuel pressure gauge. Place the towel in an approved container when the connection of the fuel pressure gauge is complete.



Procedures

1. Disconnect the electrical connector.

2. Release the fuel feed front pipe.


2

Engine Coolant Heater Fuel Pump



PRE-RELEASE