PRE-RELEASE
Refrigerant System Specifications
| Refrigerant System Specifications |
| Application | Specification | |||||||
| Metric | English | |||||||
|
Abrupt refrigerant loss
|
60 ml¹
|
2.0 oz¹
|
||||||
|
When charging system after recovery
|
20 ml
|
0.7 oz
|
||||||
Compressor Replacement
The service compressor is shipped with a specified amount of PAG oil. |
||||||||
|
Compressor oil (Sanden PXE16)
|
110 ml
|
3.7 oz
|
||||||
|
Compressor Oil (Delphi SP17)
|
150 ml
|
5.0 oz
|
||||||
|
Condenser Replacement
|
30 ml
2
|
1.0 oz
2
|
||||||
|
Evaporator Replacement
|
40 ml
2
|
1.3 oz
2
|
||||||
|
Any Line Set (Hose/Tube or Tube Assembly) Replacement
|
20 ml
2
|
0.7 oz
2
|
||||||
|
Total System PAG Oil Capacity - Sanden
|
110.0 ml
|
3.7 oz
|
||||||
|
Total System PAG Oil Capacity - Delphi
|
150 ml
|
5.0 oz
|
||||||
|
R-134a
|
||||||||
|
Refrigerant Charge (R-134a)
|
0.68 kg
|
1.5 lb
|
||||||
|
¹ Abrupt refrigerant loss due to large leak, hose rupture, collision, or pressure relief valve opening. Conditions that allow the refrigerant to seep or bleed off over time do not cause this oil loss. Upon replacement of a component that caused a large refrigerant loss, also add the required amount of oil for the particular component.
2 If more than the specified amount of PAG oil was drained from a component, add the amount drained. |
||||||||
