SAAB WIS ONLINE

PRE-RELEASE

Front Fender Replacement

Front Fender Replacement



Callout Component Name

Preliminary Procedure

1. Remove the front bumper fascia. Refer to Front Bumper Fascia Replacement .

2. Remove the headlamp. Refer to Headlamp Replacement .

3. Remove the front wheelhouse front liner. Refer to Front Wheelhouse Front Liner Replacement .

4. Remove the front wheelhouse rear liner. Refer to Front Wheelhouse Rear Liner Replacement .

5. Remove the body hinge pillar lower insulator.


1

Front Fender Fastener (Qty: 9)

Refer to Fastener Caution .

Procedures

Use a grease pencil to mark the alignment of the fender before removing the fastener.

Tighten

9 Nm (80 lb in)

2

Front Fender Air Grille


Procedures

1. Release front fender air grille retainer.

2. Use a small flat bladed tool in the corner to remove front fender air grille.


3

Front Fender


Procedures

1. Pull gently to remove the fender.

2. Transfer parts as needed.

3. Align the fender after installing as needed.




PRE-RELEASE