SAAB WIS ONLINE

PRE-RELEASE

Hood Hinge Replacement

Hood Hinge Replacement



Callout Component Name
1

Hood Hinge Fastener (Qty: 2)

Warning

When a hood hold open device is being removed or installed, provide alternate support to avoid the possibility of damage to the vehicle or personal injury.


Refer to Fastener Caution .

Procedures

Mark the location of the hood hinge to the hood with a grease pencil to aid in alignment.

Tighten

20 Nm (15 lb ft)

2

Hood Hinge Fastener (Qty: 3)

Note

Adjust the hood hinge after replacing, if needed.


Tighten

22 Nm (16 lb ft)

3

Hood Hinge



PRE-RELEASE