PRE-RELEASE

Rear Side Door Outside Handle Replacement

/ 9-5 (9650) / 2010 / 8. Body / Doors and locks / Adjustment/replacement / Rear Side Door Outside Handle Replacement

Removal Procedure

Remove cover cap (1) from the rear side door.

Using a small flat-bladed tool, release the cover cap from the rear side door.

Note
Front side door outside handle (2) must now be secured in pulled position.

Remove the rear side door outside handle from the rear side door.

2.1.

Pull the front side door outside handle (2) outwards and hold.

2.2.

Turn fastener (1) to the left and to the mechanical stop.

Remove fixed rear handle part (1).

Pull the front side door outside handle (1) to the rear and remove.

Installation Procedure

Note
Hold the front side door outside handle taut while screwing and lightly counterhold fixed handle part.

Install the rear side door outside handle.

•

Guide rear side door outside handle (1) into rear side door panel and latch door handle cage.

•

Insert fixed rear handle part.

•

Turn fastener (2) to the right and to the mechanical stop.

Install the cover cap (1) into the rear side door.