PRE-RELEASE
Number plate, front
| Number plate, front |
| To fit (not US/CA) |
| 1. |
Fit the number plate holder, centred between the grille and the air intake and in the vehicle's centre line.
|
|
| 2. |
Fit the screws 50 mm (1.97 in) (A) from the number plate holder's outer edges.
CAUTION Do not fit washers between the number plate holder and the bumper shell. The number plate holder may otherwise interfere with the function of the front sensors. |
|
| 3. |
Fit the number plate on the holder.
|
|
| To fit (US/CA) |
| 1. |
Mark out the holes for the number plate holder, 70 mm (2.75 in) (A) from the bottom of the grille and 130 mm (5.12 in) (B) from the vehicle's centre line.
|
|
| 2. |
Fit the number plate holder.
CAUTION Do not fit washers between the number plate holder and the bumper shell. |
|
| 3. |
Fit the number plate on the holder.
|
|
