Camshaft Position Actuator Adjuster Installation
|
|
Camshaft Position Actuator Adjuster Installation
|
Special Tools
EN-45059
Torque Angle Sensor Kit
For equivalent regional tools, refer to
Special Tools
.
|
1.
|
Refer to
Fastener Caution
.
|
Note
|
|
Two mechanics are required.
|
Install the camshaft adjuster (3) and the camshaft adjuster bolts (2) and tighten the bolts in three passes:
Hold at the appropriate camshaft hexagon.
|
|
|
1.1.
|
First pass tighten to
65 Nm (48 lb ft)
|
|
|
1.2.
|
Second pass to
120
degrees using the
EN-45059
sensor kit
|
|
|
1.3.
|
Third pass to
15
degrees using the
EN-45059
sensor kit
|
|
2.
|
Install the 2 camshaft adjuster closure plugs (1) and tighten to
30 Nm (23 lb ft)
.
|
