Piston and Connecting Rod Assemble
|
|
Piston and Connecting Rod Assemble
|
|
1.
|
Install the piston rings.
|
|
|
•
|
Insert into the pistons with piston ring wrench and the ‘TOP" marking pointing upwards.
|
|
|
•
|
Set the piston ring gap.
|
|
|
-
|
First piston ring (right-hand ring) in position (1)
|
|
|
-
|
Second piston ring (minute ring) in position (2)
|
|
|
-
|
Interim ring of oil scraper ring in position (3), steel band rings of oil scraper ring in position (4 and/or 5)
|
|
2.
|
|
Note
|
|
Note installation position of the piston in respect of the connection rod.
|
Attach the piston to the connection rod.
|
|
|
2.1.
|
Press the piston pin into the piston and the connection rod by hand.
|
|
|
2.2.
|
Insert the retainer in the annular groove on the piston.
|
|
|
2.3.
|
Ensure the retainer is firmly seated in the groove.
|
