Power Steering Pump Belt Installation
|
|
Power Steering Pump Belt Installation
|
Special Tools
EN-50098
Belt Installer
For equivalent regional tools, refer to
Special Tools
.
|
1.
|
Install
EN-50098
installer (2) and a NEW power steering pump belt (1) to water pump pulley and power steering pump pulley.
|
|
2.
|
Turn the engine slowly clockwise at the crankshaft balancer bolt.
|
|
3.
|
During turn the engine take care of the proper installation of the power steering pump belt to the water pump pulley (3).
|
|
4.
|
Remove the
EN-50098
installer (2).
|
|
5.
|
Check the power steering pump belt is installed clearly.
|
