PRE-RELEASE

Water Pump Pulley Installation

1.	Note Counterhold the crankshaft balancer. The belt has to be installed for this procedure. Install the water pump pulley (2) to the water pump (3).

2.	Refer to Fastener Caution . Install the 3 water pump pulley bolts (1) with locking compound. Refer to Adhesives, Fluids, Lubricants, and Sealers .

3.	Tighten the 3 water pump pulley bolts (1) to 20 Nm (15 lb ft) .

PRE-RELEASE

This project is supported by memberships and donations. If you use this site, please consider Joining SCNA and/or making a donation.

Our Friends