Crankshaft Rear Oil Seal Installation
|
|
Crankshaft Rear Oil Seal Installation
|
Special Tools
EN-42067
Rear Main Seal Installer
For equivalent regional tools, refer to
Special Tools (LDK, LHU)
.
|
1.
|
Remove excess sealer from seal recess.
|
|
2.
|
Lubricate the outside diameter of the new crankshaft seal with clean engine oil.
|
|
3.
|
Using the
EN-42067
installer (1), press the new crankshaft seal into the housing. The
EN-42067
installer also establishes the depth of the seal in the crankshaft seal bore. The seal should be flush to 0.5 mm (0.0197 in) deep.
|
