Engine Block Disassemble (LDK, LHU)
|
|
Engine Block Disassemble (LDK, LHU)
|
|
1.
|
Remove the water jacket drain plug.
|
|
2.
|
Remove the oil flow check valve.
|
|
3.
|
Remove the rear oil passage plugs (3).
|
|
4.
|
Remove the 3 oil passage plugs on each side of the block (2).
|
|
5.
|
Remove the 2 water passage plugs on the top of the block (1).
|
|
6.
|
Remove the 2 front oil passage plugs.
|
|
7.
|
Remove the knock sensors (1).
|
|
8.
|
Remove the oil pressure switch (2).
|
|
9.
|
Remove the crankshaft position (CKP) sensor (1) and bolt.
|
|
10.
|
Inspect the crankshaft position sensor for damage and replace, if necessary.
|
|
11.
|
Loosen the piston oil nozzle assembly captured bolts and remove the piston oil nozzle assemblies (1).
|
