PRE-RELEASE
Engine Front Cover and Oil Pump Installation
| Engine Front Cover and Oil Pump Installation |
| 1. |
Install the engine front cover (1) with a new gasket (2).
|
|
| 2. |
Refer to
Fastener Caution
.
Install the engine shield bolts and tighten to 25 Nm (18 lb ft) . 
|
|||||||
| 3. |
Install the long water pump bolt (1) and tighten to
25 Nm (18 lb ft)
.
|
|
| 4. |
Install the accessory drive belt tensioner (1).
|
|
| 5. |
Install the accessory drive belt tensioner bolt and tighten to
45 Nm (33 lb ft)
.
|
|
