Piston, Connecting Rod, and Bearing Removal (LDK, LHU)
|
|
Piston, Connecting Rod, and Bearing Removal (LDK, LHU)
|
Special Tools
EN-43966-1
Connecting Rod Guides
For equivalent regional tools, refer to
Special Tools (LDK, LHU)
.
|
1.
|
Rotate the crankshaft to a position where the connecting rod bolts are the most accessible.
|
|
2.
|
Mark the connecting rod and cap with the cylinder position. Also mark their orientation. This will ensure the caps and connecting rods are re-assembled properly.
|
|
3.
|
Remove any ridge at the top of the cylinder bore to avoid damage to the piston ring lands.
|
|
4.
|
Remove the connecting rod bolts.
|
|
5.
|
Remove the connecting rod cap (1).
|
|
6.
|
Install
EN-43966-1
guides (1) on the connecting rod bolts before removing the piston and connecting rod assembly.
|
|
7.
|
Remove the piston and connecting rod assembly (2).
|
