PRE-RELEASE
Catalytic Converter Installation
| Catalytic Converter Installation |
| 1. |
Install the catalytic converter (4).
|
|
| 2. |
Install a NEW clamp (1) to connect the catalytic converter (4) and the exhaust pressure sensor pipe (2).
|
|
| 3. |
Install the 2 catalytic converter brace bracket studs (6).
|
|
| 4. |
Refer to
Fastener Caution
.
Install the two catalytic converter bracket nuts (5) and tighten to 20 Nm (15 lb ft) . |
|
| 5. |
Install the catalytic converter clamp assembly (3).
|
|
