SAAB WIS ONLINE

PRE-RELEASE

Engine Block Core Hole Plug Removal - Transmission Side

Engine Block Core Hole Plug Removal - Transmission Side



1.
Warning

Do not drill out engine block core hole plugs. Metal fragments could fall into the oil channel and lead to engine damage.


Strike a hole into the plug (1).


2. Use a suitable tool (3).

3. The hole diameter inside the plug (1) should amount 6 to 7 mm (1) (0.236 to 0.275 in).


4.
Note

Do not damage the sealing surface.


To remove the core hole plug (2) put a suitable tool (1) into the hole and push in direction of the arrow.


5. Remove the old gasket material.


PRE-RELEASE