PRE-RELEASE
Fuel Rail and Injectors Cleaning and Inspection (LAU or LBW)
| Fuel Rail and Injectors Cleaning and Inspection (LAU or LBW) |
| Removal Procedure |
| 1. |
Remove the fuel injector retainer clip (1).
|
|
| 2. |
Remove the fuel injector (1).
|
|
| 3. |
Remove and discard the fuel injector seals (2).
|
|
| 4. |
Clean the exterior of the fuel rail and injectors with solvent. |
|||||||
| 5. |
Inspect the fuel rail and components for the following conditions:
|
|
| • |
Damage, debris, or restrictions to the fuel rail
|
| • |
Damage, debris, or restrictions to the fuel ports in the fuel rail
|
| • |
Damage to the mounting area for the fuel rail
|
| • |
Damage to the fuel rail mounting bolts
|
| 6. |
Inspect the fuel injectors for the following conditions:
|
|
| • |
Damage to the fuel injector electrical connector
|
| • |
Damage to the fuel inlet
|
| • |
Damage to the fuel injector body
|
| • |
Damage to the fuel injector tip
|
| 7. |
Replace the fuel rail or fuel injectors if damage is found.
|
|
| Installation Procedure |
| 1. |
Lubricate the NEW fuel injector seals (2) with 5W30 engine oil.
|
|
| 2. |
Install the NEW fuel injector seals (2).
|
|
| 3. |
Install the fuel injector into the fuel rail (1).
|
|
| 4. |
Install the fuel injector retainer clip (1).
|
|
